Shop
Filter by price
Filter by brand
AFRICELL BRANDAFRICELL BRAND 102
AKT BRANDAKT BRAND 100
BICODI BRANDBICODI BRAND 100
Canadian Solar BrandCanadian Solar Brand 101
COLA BRANDCOLA BRAND 100
CWORTH ENERGY BRANDCWORTH ENERGY BRAND 99
Deye BrandDeye Brand 100
DP BRANDDP BRAND 94
ECOFLOW BRANDECOFLOW BRAND 98- EMIRATES BRAND 100
Felicity BrandFelicity Brand 124
GENUS BRANDGENUS BRAND 100
Growatt BrandGrowatt Brand 102
HAISIC BRANDHAISIC BRAND 97
Itel Energy BrandItel Energy Brand 104
JA SOLAR BRANDJA SOLAR BRAND 100
JINKO SOLAR BRANDJINKO SOLAR BRAND 100
LONGI SOLAR BRANDLONGI SOLAR BRAND 101
LUMINOUS BRANDLUMINOUS BRAND 93
Lutian brandLutian brand 100
LVTOPSUN BRANDLVTOPSUN BRAND 100
MUST BRANDMUST BRAND 30- SAKO BRAND 99
SMS SUNMATE BRANDSMS SUNMATE BRAND 100
SOLIS BRANDSOLIS BRAND 100
SRNE BRANDSRNE BRAND 97
SU KAM BRANDSU KAM BRAND 98
SUKHIG BRANDSUKHIG BRAND 99
Sun King BrandSun King Brand 98
TRINA BRANDTRINA BRAND 98
WAKATEK BRANDWAKATEK BRAND 98
YOHAKO BRANDYOHAKO BRAND 101
Color
Stock status
Showing 4681–4692 of 4840 results
WAKATEK TPT-3KVA Pure Sine Wave Inverter 24V
3KVA 24V Pure Sine Wave Inverter for Backup Power
Support Essential Appliances During Power Interruptions
A battery-powered inverter can help supply electricity to selected appliances when mains power is unavailable. It converts stored DC energy into AC electricity for compatible devices. This makes a suitable inverter useful for backup planning in homes, workshops, and other locations that need an alternative power source.
The TPT-3KVA model is advertised with a 24V battery input and pure sine wave output. Its 3KVA rating can help you begin assessing your power requirements. However, you should confirm the actual continuous output in watts before deciding which appliances to operate.
Different devices have different electrical demands. Lighting and small electronics may require less power than pumps, refrigerators, or other motor-driven equipment. Some appliances also draw extra current when starting. Therefore, check both the running wattage and starting requirements of each device.
For better load management, prioritise essential appliances and calculate their combined power demand. Keep the total within the inverter’s specified operating limits. This approach helps you plan a suitable backup system and avoid unnecessary overloads.
Improve Energy Use with Suitable Battery Storage
The battery determines how much stored energy is available to the inverter. Its capacity, condition, and discharge limits influence the total operating time. Therefore, choosing the right battery is just as important as selecting an inverter with an appropriate output rating.
Begin by estimating the energy consumption of your planned loads. Consider how many appliances will operate at once and how long you need them to run. Compare this requirement with the battery’s usable energy, allowing for conversion losses and other system limitations.
A 24V battery system must match the inverter’s input requirements. The charging method and settings must also suit the battery chemistry. Check the manufacturer’s guidance before connecting a battery or charger.
If you intend to combine the inverter with solar panels, confirm the required system configuration. The unit may need a separate solar charge controller if direct solar charging is not supported. Select compatible components and follow the relevant installation instructions.
Proper wiring is essential for safe operation. Use correctly rated cables, suitable fuses, and appropriate isolation equipment. Because high loads can draw significant current, a qualified installer should check the electrical connections and protective devices.
Choose the Right Setup for Your Requirements
Before buying this 3KVA inverter, review the complete technical specifications. Important details include rated output power, surge capacity, input voltage range, AC output voltage, operating frequency, efficiency, and overload protection. Also, confirm the supported battery types and whether charging equipment is included.
Consider the installation environment as well. The inverter needs a location that meets the manufacturer’s ventilation, temperature, and access requirements. Keep the equipment away from unsuitable conditions, and do not modify its wiring or internal components.
If you plan to power several appliances together, calculate their combined running and starting requirements. This helps you assess whether the inverter can handle the expected load. Remember that the KVA rating alone does not establish the exact usable wattage.
Finally, ask the supplier for the official datasheet and warranty details for the exact TPT-3KVA 24V version. Confirm all specifications before ordering. With a compatible battery, correct electrical protection, and careful load planning, this inverter can be considered for a suitable battery-based backup power system.
WAKATEK TPT-5KVA Pure Sine Wave Inverter 48V
5KVA 48V Pure Sine Wave Inverter for Backup Power
Support Essential Electrical Loads
A battery-based inverter can help provide electricity to selected devices when the main power supply is unavailable. It converts DC energy stored in a compatible battery into AC electricity for supported appliances. This makes a suitable inverter an option for home backup systems, offices, and other applications that need an alternative source of power.
The TPT-5KVA model is listed in the manufacturer’s inverter catalogue as a pure sine wave inverter. <Cite refs={[“turn494914search0″,”turn494914search2”]}/> Its advertised 5KVA rating provides a useful starting point for comparing inverter options. However, you should confirm the exact continuous output in watts before connecting appliances.
Different devices have different electrical requirements. Lights, routers, computers, and televisions may have relatively modest loads. Refrigerators, pumps, and motor-driven equipment can require additional power during startup. Therefore, check the running wattage and starting demand of each appliance.
For a practical backup setup, prioritise essential devices and calculate their combined power consumption. Keep the total within the inverter’s continuous output rating. Also, check the surge rating to determine whether the inverter can handle temporary increases in demand.
Manage Battery Capacity and Operating Time
Battery capacity affects how long the inverter can supply power. A higher inverter rating does not automatically provide longer backup time. Runtime depends on the battery’s usable energy, the connected load, conversion losses, and the system’s operating limits.
Start by estimating how much energy your appliances consume each day. For example, calculate the wattage of each device and multiply it by the number of hours you expect to use it. Add these figures to estimate your total energy requirement.
Next, compare the result with the battery’s usable capacity. Allow for inverter losses and any limits on battery discharge. This provides a more realistic estimate of how long the system may operate.
The battery must also match the inverter’s 48V input requirements. Check the supported battery chemistry, charging voltage, and maximum charging current. If you plan to use lithium batteries, confirm compatibility with the inverter and any required battery communication settings.
Use correctly rated cables and suitable protective devices. Because battery systems can deliver high current, secure connections and correct cable sizing are essential. Follow the manufacturer’s instructions and use a qualified installer when needed.
Choose the Right Configuration for Your Needs
Before purchasing this inverter, request the official datasheet for the exact TPT-5KVA 48V model. Confirm its continuous wattage, surge capability, output voltage, frequency, efficiency, and protection functions. Also, check whether battery charging or solar charging equipment is included.
If you intend to build a solar system, verify whether the inverter supports direct solar input or requires a separate solar charge controller. Check all voltage and current limits before selecting panels and other components. Never assume that a pure sine wave inverter automatically includes MPPT functionality.
Installation conditions also matter. Choose a location that meets the manufacturer’s ventilation and temperature requirements. Follow the specified grounding and wiring instructions, and keep the equipment accessible for inspection.
Finally, review the warranty, installation requirements, and supplier support. With compatible components and careful load planning, a 48V pure sine wave inverter can be a useful part of a backup power system. Confirm all technical details before ordering to ensure that the selected model suits your appliances and energy needs.
WAKATEK TPT-6KVA Hybrid Inverter 48V
6KVA 48V Hybrid Inverter for Solar Energy Systems
Support Essential Loads with a Suitable Setup
A hybrid inverter can help manage electricity in a compatible solar and battery system. It may provide power conversion and battery charging while supporting selected backup functions. This can be useful for households and small businesses that want to make better use of solar electricity.
The advertised 6KVA rating can help you compare inverter options. However, the actual power available to your appliances depends on the rated wattage, power factor, and surge capacity. Therefore, check the official specifications rather than relying on the KVA figure alone.
Consider which appliances you need during a power interruption. Lights, fans, computers, and communication equipment may have different power demands. Larger appliances can require substantially more power, particularly when their motors start. Calculate the combined load and keep it within the inverter’s documented limits.
You should also confirm the inverter’s backup operation. Not every hybrid model supports the same switching functions or load configurations. Ask the supplier whether the unit can power your selected loads during a grid outage and what installation requirements apply.
Plan Your Solar Array and Battery Capacity
A suitable solar array can help provide energy for daytime use and battery charging. The inverter’s supported PV input limits determine which panels and wiring arrangements you can use. Check the maximum input voltage, MPPT operating range, maximum solar power, and input current before choosing panels.
Do not connect panels based on wattage alone. Their voltage and current must also match the inverter’s requirements. A qualified installer can calculate the appropriate panel arrangement and check the system design.
Battery capacity determines how much energy can be stored for later use. A 48V battery system must meet the inverter’s voltage and charging requirements. Confirm the supported battery chemistry, charging current, discharge limits, and communication compatibility where applicable.
To estimate backup duration, calculate the energy required by your appliances and compare it with the battery’s usable capacity. Allow for conversion losses and other system limitations. Actual runtime will vary with the connected load and battery condition.
If you plan to expand the system later, ask whether the inverter supports additional batteries or parallel operation. Confirm the approved configuration instead of assuming that expansion is available.
Verify Technical Details Before Buying
Before ordering the TPT-6KVA 48V Hybrid Inverter, request a current datasheet from the supplier. Check the continuous output in watts, surge capability, AC output voltage, frequency, solar input specifications, charging options, and protection features. Also, confirm whether the unit includes MPPT solar charging and which power sources it can manage.
Installation quality is essential for safe and dependable operation. Use suitable cables, circuit breakers, fuses, and isolation equipment. Follow the manufacturer’s grounding and ventilation instructions. A qualified installer should verify the wiring and configure the battery and inverter correctly.
Review the warranty, service arrangements, and availability of replacement parts before purchasing. These factors can matter as much as the advertised power rating when planning a long-term solar installation.
With compatible components and careful load planning, a hybrid inverter can help manage solar generation and stored electricity. Confirm the exact model specifications with the supplier to ensure the system meets your household or business requirements.
WAKATEK TPT-8KVA Hybrid Inverter 48V
8KVA 48V Hybrid Inverter for Solar and Backup Power
Support Essential Loads with Flexible Power Management
A hybrid inverter can help manage electricity in a compatible solar and battery system. Depending on its design, it may convert solar energy, charge a connected battery, and provide AC power to selected appliances. This makes it an option for households and businesses planning a flexible energy setup.
The advertised 8KVA rating provides a useful starting point when comparing inverter options. However, the actual power available to your appliances depends on the rated wattage, power factor, and surge capability. Always check the official specifications before connecting equipment.
Consider the appliances you need during a power interruption. Lights, fans, computers, and communication devices have different energy requirements. Refrigerators, pumps, and other motor-driven equipment may need additional power when starting. Calculate the combined load and keep it within the inverter’s documented limits.
You should also confirm the unit’s backup functions. Not every hybrid inverter supports the same switching arrangements or load configurations. Ask the supplier whether this model can power your selected appliances during a grid outage and what installation requirements apply.
Plan Your Solar Array and Battery Capacity
A suitable solar array can help provide energy for daytime use and battery charging. The inverter’s solar input specifications determine which panels and wiring arrangements you can use. Check the maximum PV voltage, operating voltage range, maximum solar input power, and input current before selecting panels.
Do not connect panels based on wattage alone. Their voltage and current must also match the inverter’s limits. A qualified installer can calculate a suitable panel arrangement and check the system design.
Battery capacity determines how much energy can be stored for later use. A compatible 48V battery system must meet the inverter’s voltage and charging requirements. Confirm the supported battery chemistry, charging current, discharge limits, and communication compatibility where applicable.
To estimate backup duration, calculate the energy required by your appliances and compare it with the battery’s usable capacity. Allow for conversion losses and other system limitations. Actual runtime will vary according to the connected load, battery condition, and operating environment.
If you plan to expand the system later, ask whether the inverter supports additional batteries or parallel operation. Confirm the manufacturer’s approved configuration before buying extra equipment.
Verify Compatibility Before Buying
Before purchasing the TPT-8KVA 48V Hybrid Inverter, request its official datasheet. Check the continuous output in watts, surge rating, AC output voltage, operating frequency, solar input limits, charging functions, and protection features. Also, confirm whether the unit includes an MPPT solar controller and which power sources it can manage.
Installation quality is essential for safe operation. Use correctly rated cables, circuit breakers, fuses, and isolation equipment. Follow the manufacturer’s grounding and ventilation instructions. A qualified installer should verify the wiring and configure the battery and inverter correctly.
Review the warranty, service arrangements, and availability of replacement parts before ordering. These details can help you assess the product’s long-term suitability.
With compatible components and careful load planning, a hybrid inverter can help manage solar generation and stored electricity. Confirm the exact model specifications with your supplier to ensure the system meets your household or business requirements.
WAKATEK Wall-Mounted 10kWh Lithium Battery 51.2V
10kWh Lithium Battery with 51.2V Output
The Wall Mounted Battery is designed to provide energy storage for compatible solar installations and backup power systems. Its stated 10kWh capacity offers storage for later use, while the 51.2V nominal voltage helps identify suitable system compatibility. Always verify the official specifications before connecting the battery to an inverter or other equipment.
Stored energy can help support selected appliances when solar generation decreases or another power source becomes unavailable. However, backup duration depends on the connected load, usable battery capacity, conversion efficiency, and operating conditions. Careful planning helps you understand how much energy your household or workplace needs.
Make Better Use of Stored Energy
Start by listing the appliances you want to power during normal operation and outages. Estimate their wattage and expected running hours to calculate energy consumption. This can help determine whether the battery capacity suits your needs.
For example, essential lighting and networking equipment generally use less energy than high-power heating appliances. Choosing essential loads can help extend backup time. Remember that actual results vary according to appliance efficiency and the system’s operating limits.
The wall-mounted format can help keep the installation organised and reduce the need for floor space. However, the wall must support the battery’s weight safely. Check the mounting requirements and allow suitable access for inspection and maintenance.
Build a Compatible Battery System
Before installation, confirm that the inverter supports a 51.2V lithium battery and meets its charging and discharge requirements. Check communication settings, cable ratings, and protective equipment as well. Compatibility is essential for safe and dependable operation.
Additional batteries should only be connected when the manufacturer permits expansion. Confirm supported configurations, communication requirements, and maximum system capacity before adding units. Use approved components and follow the installation manual.
Choose a suitable location that meets the required temperature and environmental limits. Keep cables organised, avoid unsuitable moisture exposure, and ensure that the installation does not block required ventilation. A qualified installer can verify the mounting surface and electrical setup.
Before ordering, check the product specifications, package contents, warranty coverage, and availability of technical support. Confirm whether mounting accessories and communication cables are included.
The Wall Mounted Battery offers a practical option for users planning home or business energy storage. With suitable equipment, accurate load calculations, and professional installation, it can help manage stored electricity for everyday needs and backup support.
WAKATEK Wall-Mounted 5kWh Lithium Battery 51.2V
5kWh Lithium Battery with 51.2V Voltage
The Wall Mounted Battery provides a compact storage option for compatible solar installations and backup power systems. Its stated 5kWh capacity allows electricity to be stored for later use, while the 51.2V nominal voltage helps identify compatible equipment. Check the official specifications before connecting the battery to an inverter or charger.
Stored energy may help power selected appliances when solar production falls or the main electricity supply is interrupted. However, backup time varies according to the connected load, usable capacity, conversion losses, and operating conditions. Careful planning helps you make better use of available energy.
Plan Your Daily Energy Requirements
Start by listing the appliances you need during normal operation and power interruptions. Estimate their wattage and expected running hours to calculate daily energy use. This information helps you decide whether a 5kWh battery suits your needs.
Essential devices such as lights, fans, and networking equipment may consume less energy than high-power appliances. Prioritising essential loads can help extend backup time. Remember that actual results depend on appliance efficiency and the system’s operating limits.
The wall-mounted format can help maintain a neat installation while reducing floor-space requirements. However, the mounting surface must safely support the battery’s weight. Check the installation instructions and allow suitable access for inspection and maintenance.
Create a Compatible Battery Setup
Before installation, verify that the inverter supports a 51.2V lithium battery. Check its charging requirements, discharge limits, and communication settings. Correctly rated cables and suitable electrical protection are also important for safe operation.
Additional batteries should only be connected if the manufacturer permits expansion. Confirm the approved configuration and maximum supported capacity before adding units. Use compatible components and follow the product manual.
Install the battery in a suitable location that meets the specified temperature and environmental limits. Keep connections organised and protect the unit from conditions beyond its rating. A qualified installer can check the wall mounting and electrical setup.
Before ordering, confirm the product specifications, included accessories, warranty coverage, and technical support options. Check whether mounting hardware and communication cables come with the battery.
The Wall Mounted Battery can be a useful choice for compact home or office energy storage. With accurate load calculations, compatible equipment, and professional installation, it can help manage stored electricity for everyday use and backup support.
WAKATEK WK-AY-200W All-in-One Solar Street Light 200W LED
A Practical Solar Street Light Solution
Solar-Powered Lighting for Everyday Needs
The WAKATEK WK-AY-200W 200W LED solar street light offers an option for outdoor areas that need lighting without a continuous grid connection. Its integrated design combines the main lighting components in one unit, making it worth considering for suitable residential and commercial projects.
During daylight hours, the solar panel collects energy from the sun. The system stores that energy in a battery for later use. After sunset, the stored energy powers the light according to its design and settings.
As a result, solar lighting can help reduce grid electricity consumption. It may also simplify lighting projects in locations where electrical connections are limited. However, actual performance depends on sunlight, battery capacity, weather conditions, and operating settings.
For this reason, check the manufacturer’s specifications before choosing a light. Make sure the product suits the number of hours you need it to operate each night.
Where Can You Use This Solar Street Light?
This all-in-one solar street light can be considered for several outdoor applications. For example, it may suit private roads, parking areas, residential compounds, building entrances, and selected commercial spaces.
In addition, solar-powered lighting may simplify installation where running electrical cables is inconvenient. This can make it a useful option to evaluate for new developments and certain outdoor upgrades.
Nevertheless, the 200W LED label alone does not confirm the exact brightness or coverage. Ask the supplier for the verified luminous output and recommended mounting height before deciding how many lights to purchase.
To achieve better coverage, plan the pole positions carefully. Consider road width, distance between lights, mounting height, and nearby obstacles. Also, check that buildings or trees will not block sunlight from reaching the solar panel.
A suitable layout can improve visibility and help reduce dark spots. Therefore, assess the site before finalising your lighting plan.
Check the Specifications Before Buying
Before purchasing the WAKATEK WK-AY-200W, ask the supplier for the official datasheet for this exact model. Confirm the solar panel power, battery type, battery capacity, LED brightness, charging time, and expected operating hours.
Also, check the ingress protection rating to understand the unit’s resistance to dust and water. Ask whether the product includes a motion sensor, remote control, adjustable lighting modes, or mounting accessories. Only list these features as included when the supplier confirms them.
Furthermore, review the warranty and after-sales support. Clear warranty terms help you understand what assistance is available if a fault occurs.
Finally, compare the confirmed specifications with your project’s requirements. Sunlight exposure, local weather, pole height, and operating hours all affect performance. With proper planning and accurate product information, you can make a more informed choice for your outdoor solar lighting project.
WAKATEK WK-AY-300W All-in-One Solar Street Light 300W LED
A Practical Solar Street Light Solution
Solar-Powered Lighting for Everyday Needs
The WAKATEK WK-AY-300W 300W LED solar street light offers an option for outdoor spaces that need lighting without a continuous grid connection. Its all-in-one design brings the main components together in one unit, making it worth considering for suitable residential and commercial projects.
During daylight hours, the solar panel collects energy from the sun. The system stores this energy in a battery for later use. After sunset, the stored energy powers the light according to its design and settings.
As a result, solar lighting can help reduce grid electricity consumption. It may also simplify installation in locations where electrical connections are limited. However, actual performance depends on sunlight availability, battery capacity, weather conditions, and lighting settings.
For this reason, check the product specifications before choosing a light. Make sure it can meet your expected operating hours and lighting requirements.
Where Can You Use This Solar Street Light?
This all-in-one solar street light can be considered for several outdoor applications. For example, it may suit private roads, residential compounds, parking areas, entrances, and selected commercial spaces.
In addition, solar-powered lighting may simplify installation where running electrical cables is inconvenient. This can make it worth considering for new construction projects and certain outdoor upgrades.
Nevertheless, the 300W product label alone does not confirm the exact brightness or coverage. Ask the supplier for the verified light output and recommended mounting height before deciding how many units to purchase.
To achieve better coverage, plan the pole positions carefully. Consider road width, mounting height, and distance between lights. Also, check whether nearby trees or buildings could block sunlight from reaching the solar panel.
A suitable layout can improve visibility and help reduce dark spots. Therefore, assess the site before finalising your lighting plan.
Check the Specifications Before Buying
Before purchasing the WAKATEK WK-AY-300W, request the official datasheet for this exact model. Confirm the solar panel power, battery type, battery capacity, LED brightness, charging time, and expected operating hours.
Also, check the ingress protection rating to understand the product’s resistance to dust and water. Ask whether the unit includes a motion sensor, remote control, adjustable lighting modes, or mounting accessories. Only list these features when the supplier confirms them.
Furthermore, review the warranty and after-sales support. Clear warranty terms help you understand what assistance is available if a problem occurs.
Finally, compare the confirmed specifications with your project’s needs. Sunlight exposure, local weather, pole height, and expected operating hours all affect performance. With careful planning and accurate product information, you can make a more informed choice for your outdoor solar lighting project.
WAKATEK WK-AY-400W All-in-One Solar Street Light 400W LED
Choose the WK-AY-400W for Solar-Powered Lighting
The WK-AY-400W solar street light offers an option for projects that require outdoor lighting powered by solar energy. Because it uses sunlight as its energy source, it may help reduce electricity use for the lighting point. In addition, a solar-powered design can be useful in locations where extending electrical cables would be difficult or costly.
However, real-world performance depends on several factors. These include daily sunlight, battery capacity, solar panel output, weather conditions, and the selected lighting mode. Therefore, review the manufacturer’s specifications before estimating how many hours the light can operate each night.
Installation and Maintenance Tips
Good placement is important for solar street light performance. First, select a pole or mounting point that meets the manufacturer’s installation requirements. Next, make sure the solar panel receives enough direct sunlight and is not shaded by trees or buildings. Secure the unit correctly and follow the supplied installation instructions.
Regular maintenance can also support reliable operation. Clean dust and dirt from the solar panel when needed, especially in areas with dry weather or heavy dust. Inspect the mounting hardware periodically and check for visible damage. Furthermore, keep the surrounding area clear of objects that block sunlight or interfere with the light’s coverage.
Before installation, confirm whether the product includes mounting accessories, a remote control, and the required installation hardware. Do not assume these items are included unless the seller confirms them.
What to Check Before You Buy
When comparing the WK-AY-400W with other outdoor lights, look beyond the wattage printed in the product title. Ask the seller to confirm the LED power rating, lumen output, solar panel wattage, battery type and capacity, charging time, and expected operating time. These specifications provide a clearer picture of actual lighting performance.
You should also check the product’s water-resistance rating, warranty period, and recommended installation height. If you plan to light a road or parking area, consider the required coverage and spacing between poles. For a larger project, request a lighting recommendation based on the site layout.
With verified specifications and suitable placement, the WAKATEK WK-AY-400W can be assessed for your outdoor lighting needs. Compare the datasheet with your project requirements to make an informed purchase.
WAKATEK WK-AY-500W All-in-One Solar Street Light 500W LED
Benefits and Buying Guide
Why Consider the WK-AY-500W Solar Street Light?
The WK-AY-500W solar street light offers an option for people planning outdoor lighting with solar energy. Because it uses sunlight as its energy source, it may help reduce grid electricity use for the lighting point. It can also be worth considering for locations where running electrical cables is inconvenient or expensive.
An integrated design can make the installation process more straightforward than a system that requires multiple separate components. However, the final installation requirements depend on the product design and the mounting location. Therefore, review the installation guide before choosing a pole or mounting position.
It is also important to compare the complete specifications rather than relying on the wattage shown in the product name alone. Actual brightness, battery storage, solar charging capacity, and operating time all influence how well a solar street light performs.
Installation and Routine Maintenance
Good installation helps a solar street light collect sunlight effectively. First, choose a location with minimal shading during daylight hours. Next, check that the pole and mounting hardware are suitable for the unit. Follow the manufacturer’s instructions to secure the light and position the solar panel correctly.
Routine maintenance is also useful. Clean the solar panel when dust or dirt builds up on its surface. This is particularly important in areas where dry weather and airborne dust are common. In addition, inspect the mounting hardware periodically and look for visible damage.
Keep nearby branches and other obstructions from blocking sunlight. If the light includes adjustable operating modes, use the settings recommended by the manufacturer. These steps can help maintain suitable charging conditions, although they cannot guarantee a specific runtime or brightness level.
What to Check Before Ordering
Before buying the WK-AY-500W solar street light, ask the supplier for a datasheet that matches the exact model number. Confirm the actual LED power, luminous output, solar panel wattage, battery type, battery capacity, charging time, and expected operating hours. These details make it easier to compare products accurately.
You should also check the water-resistance rating, warranty coverage, and availability of replacement parts. For road lighting, review the recommended mounting height and light distribution. For parking areas and large compounds, consider the size of the area and the spacing between lights.
Finally, confirm the package contents, delivery terms, and after-sales support before payment. Do not assume that a particular battery type, remote control, motion sensor, or waterproof rating is included unless it appears in the official product documentation.
By checking these details first, you can make a better-informed decision and determine whether this solar street light is suitable for your project.
WAKATEK WK-LBG-48200 48V 200Ah LiFePO4 Battery 10kWh
A 10kWh Battery for Everyday Energy Needs
The 48V LiFePO4 Battery is designed for consideration in compatible solar storage and backup power systems. Its 200Ah capacity and stated 10kWh energy rating offer a useful option for homes, offices, and small commercial sites that need stored electricity for selected loads.
Lithium iron phosphate technology is used in many energy storage products. It is valued for its stable chemistry and potential for a long service life. However, real performance depends on the exact battery design, temperature, charging method, installation, and daily energy demand.
Make Better Use of Solar Power
Solar panels generate electricity during daylight, although output changes with sunlight, weather, and panel placement. A compatible battery can store some of this energy for use later. As a result, selected devices may continue operating when solar production is low or grid power is unavailable.
To estimate backup time, list the appliances you want to power and calculate their expected energy consumption. Lighting, routers, and fans may use less energy than pumps or other high-power equipment. The total load and operating duration determine how quickly the battery discharges.
The battery must work with a compatible inverter or energy storage system. Check the manual for voltage requirements, charging settings, continuous power limits, and communication support. Do not assume every inverter supports every lithium battery. Ask a qualified installer to confirm compatibility before installation.
Safe Installation and Long-Term Care
Choose a location that meets the manufacturer’s requirements. Keep the battery away from water, excessive heat, and conditions outside its approved operating range. Ensure that the mounting arrangement, wiring, and protective devices suit the system.
Follow the specified charging and discharging limits. Use approved accessories, and avoid opening, repairing, or modifying the battery without qualified support. If the system shows repeated warnings or the battery has visible damage or unusual heating, stop using it when safe and contact a professional.
Before buying, compare the verified dimensions, weight, warranty, cycle-life rating, and available protection features. Also check the recommended operating temperature and charging current.
The 10kWh capacity provides a starting point for planning, but usable energy and backup duration will vary. Inverter losses, battery settings, load demand, and battery condition all affect results. Careful system sizing can improve reliability and support better use of stored electricity over time.
Choose this battery after confirming the specific specifications and installation requirements for your intended application.
WAKATEK WK-LBWP-30024 25.6V 300Ah LiFePO4 Battery 7.5kWh
A 300Ah Battery for Everyday Energy Needs
The 25.6V LiFePO4 Battery provides a storage option for compatible solar power and backup systems. Its 300Ah capacity and stated 7.5kWh energy rating make it suitable for consideration in residential and small commercial applications where stored electricity can support selected loads.
Lithium iron phosphate technology is widely used in rechargeable energy storage products. It offers several useful characteristics, including stable battery chemistry and the potential for a long service life. However, actual performance depends on the battery design, installation, temperature, charging method, and daily energy demand.
Make Better Use of Stored Solar Energy
Solar panels produce electricity during daylight hours, although output changes with sunlight, weather, and panel placement. A compatible battery can store some of this energy for use later. As a result, users may be able to operate selected devices when solar production is low.
To estimate backup time, list the appliances you want to power and calculate their expected energy consumption. Lighting, routers, fans, and other modest loads may require less energy than heaters, pumps, or large appliances. The total load and operating duration determine how quickly the battery discharges.
The battery must work with a compatible inverter or energy storage system. Check the equipment manual for voltage requirements, charging settings, continuous power limits, and communication support. Do not assume that every inverter supports every lithium battery. Ask a qualified installer to confirm compatibility before installation.
Safe Installation and Long-Term Care
Choose an installation location that meets the manufacturer’s requirements. Keep the unit away from water, excessive heat, and conditions that fall outside its approved operating range. Ensure that the mounting arrangement, wiring, and protective devices are suitable for the system.
Follow the specified charging and discharging limits. Use approved accessories, and avoid opening, repairing, or modifying the battery without qualified support. If the system displays repeated warnings or the battery shows visible damage or unusual heating, stop using it when safe and contact a professional.
Before buying, compare the battery’s verified dimensions, weight, warranty, cycle-life rating, and available protection features. Also check the recommended operating temperature and charging current. These details help you assess whether the unit matches your installation and energy goals.
The 7.5kWh capacity provides a useful starting point for planning, but actual usable energy and backup duration will vary. Inverter losses, battery settings, load demand, and battery condition all affect results. Careful system sizing helps improve reliability and supports better use of stored electricity over time.
Choose this battery only after confirming the specifications and installation requirements for your intended application.
Online store with a wide selection of furniture and decor
Furniture is an invariable attribute of any room. It is they who give it the right atmosphere, making the space cozy and comfortable, creating favorable conditions for productive work or helping to relax after a hard day. More and more often, customers want to place an order in an online store, when you can sit down at the computer in your free time, arrange the furniture in the photo and calmly buy the furniture you like. The online store has a large catalog of furniture: both home and office furniture are available.
Furniture production is a modern form of art
Furniture manufacturers, as well as manufacturers of other home goods, are full of amazing offers: we often come across both standard mass-produced products and unique creations - furniture from professional craftsmen, which will be appreciated by true connoisseurs of beauty. We have selected for you the best models from modern craftsmen who managed to ingeniously combine elegance, quality and practicality in each product unit. Our assortment includes products from proven companies. Who for many years of continuous joint work did not give reason to doubt their reliability and honesty. All of them guarantee the high quality of their products, excellent operational characteristics, attractive appearance of the products, a long period of use of the furniture, as well as safety.