YOHAKO BRAND
Filter by price
Stock status
Showing 25–36 of 100 results
YOHAKO 24V 200Ah Lithium Battery Solar storage battery
High-Capacity Battery for Solar Backup Systems
The 24V 200Ah Lithium Battery is designed for users who need dependable energy storage for solar power and backup applications. Its LiFePO4 chemistry supports stable operation and efficient energy use. With a nominal capacity of 200Ah at 24V, it provides approximately 5.12kWh of stored energy for compatible electrical systems.
Furthermore, its deep-cycle design supports repeated charging and discharging within the recommended operating limits. You can store electricity produced during sunny hours and use that energy when solar production decreases. It can also help supply suitable loads during interruptions in the main electricity supply.
The 24V 200Ah Lithium Battery may support lighting, fans, networking devices, and other compatible appliances. Actual runtime depends on the connected load and the battery’s usable energy. For example, higher-power appliances consume stored energy faster than low-power devices. Therefore, estimate your expected consumption before planning your system.
Modern LiFePO4 Technology for Long-Term Use
Lithium iron phosphate technology is known for its stable chemistry and good cycle life. Compared with many conventional lead-acid batteries, it can offer greater cycle durability under suitable conditions. It also needs a compatible charging profile for safe and effective operation.
This battery can suit residential solar installations, small commercial systems, cabins, and off-grid setups. Its 24V configuration supports compatible inverters and charging equipment designed for this voltage. However, you should confirm system compatibility before connecting any components.
For reliable performance, follow the recommended charging limits and installation instructions. Check the battery dimensions, operating temperature range, discharge rating, and protection features before purchase. These checks help you choose the right storage solution for your requirements.
With its substantial capacity and deep-cycle design, this battery provides a practical option for improving solar energy availability. It helps users store electricity for later use and build a more flexible backup power system.
YOHAKO 250W Mono Solar Panel High-efficiency solar module
A Practical Choice for Renewable Energy
Clean Energy for Small Solar Systems
The 250W Mono Solar Panel offers a useful option for people seeking renewable electricity. It uses sunlight to generate power without fuel consumption during normal operation. As a result, it can help lower dependence on conventional electricity sources.
You can consider this module for small homes, outdoor lighting, remote equipment, and selected off-grid applications. Furthermore, combining suitable panels can increase total system capacity. However, the final setup should match your daily energy demand and available sunlight.
Easy Care and Installation Planning
Solar panels require little routine maintenance. First, remove dust with suitable cleaning materials. Next, inspect the mounting hardware and electrical connections. Also, keep nearby trees and structures from casting unnecessary shadows.
Proper installation improves safety and supports dependable operation. Therefore, use compatible mounting equipment and follow the installation instructions. Ask a qualified installer to handle electrical connections when needed.
Choose Compatible Components
Before purchasing, review the panel’s dimensions, voltage, current, and connector type. These details help you confirm compatibility with your existing system. In addition, estimate your daily electricity consumption to determine how many panels you need.
Overall, this solar module offers a practical option for smaller renewable energy projects. With suitable components and proper installation, it can contribute to useful solar power generation for everyday applications.
YOHAKO 2HP AC/DC Solar Water Pump Agricultural water pump
2HP AC/DC Solar Water Pump for Farm Irrigation
Reliable water access plays an important role in agricultural activities. The 2HP AC/DC Solar Water Pump Agricultural Water Pump provides a solution for moving water to suitable irrigation areas and other locations that require a consistent supply. Its 2HP rating makes it worth considering for projects that match its rated pumping performance.
Use Solar Energy for Water Pumping
Solar-powered pumping allows farmers to use sunlight as an energy source. Depending on the system configuration, compatible AC/DC operation may provide additional flexibility. This can be useful in areas where electricity access varies. Always confirm the supported voltage, controller requirements, and solar panel capacity before connecting the pump.
Support Different Agricultural Applications
This pump can be considered for crop watering, farm irrigation, and transferring water between suitable sources and storage tanks. Its suitability depends on the required water volume and pumping conditions. The water source, total lifting height, pipe diameter, and operating pressure all affect the final output.
Installation and Compatibility
Before installation, calculate the total pumping head and estimate the daily water requirement. Choose suitable piping, electrical protection, and solar equipment according to the manufacturer’s instructions. If the pump will operate in a well or underwater, confirm that its design supports the intended installation.
Maintenance for Consistent Performance
Regular inspection helps identify leaks, blocked pipes, loose electrical connections, and other issues. Keep electrical controls protected from moisture and operate the pump within its rated limits. Professional installation can help improve safety and prevent damage caused by incorrect connections.
An Energy-Conscious Choice for Farms
The 2HP AC/DC Solar Water Pump Agricultural Water Pump can support suitable agricultural water management projects. Its solar-compatible design offers a way to make use of renewable energy when conditions allow. Before purchasing, verify the rated flow rate, maximum pumping head, voltage, and power requirements to ensure the pump meets your farm’s needs.
YOHAKO 2HP Solar Air Conditioner Hybrid cooling system
Smart Hybrid Air Conditioning Technology
Flexible Cooling with Solar Energy
The 2HP Solar Air Conditioner offers a modern approach to indoor cooling by combining solar power compatibility with inverter-based operation. It can be a useful option for users who want to integrate renewable energy into their cooling systems.
With a properly configured solar installation, the system can use available sunlight to support air conditioning. Solar panel capacity, voltage requirements, and electrical connections must match the manufacturer’s specifications. Furthermore, hybrid operation depends on whether the particular model supports both solar and conventional AC power.
The inverter system adjusts compressor speed according to the required cooling output. As a result, it can respond to changing indoor temperatures and cooling needs. However, energy savings vary with weather conditions, usage patterns, and the complete system configuration.
Practical Cooling for Everyday Comfort
The 2HP Solar Air Conditioner can provide comfortable indoor conditions in residential and commercial environments when correctly sized for the space. It offers a practical option for users seeking solar-compatible cooling and flexible power use.
Before installation, confirm the rated cooling capacity, power consumption, solar input requirements, and supported operating modes. A qualified technician can help select suitable solar panels and electrical protection equipment.
Regular maintenance, clean filters, and sensible temperature settings also help support efficient operation. With suitable installation and compatible power equipment, this hybrid cooling system can meet everyday air conditioning needs.
YOHAKO 2KVA 12V Pure Sine Wave Inverter Home backup inverter
2KVA 12V Inverter for Essential Appliances
The YOHAKO 2KVA 12V Pure Sine Wave Inverter is a practical option for users who need backup electricity at home or in a small workplace. It is designed to work with a 12V battery system and provide AC power for compatible appliances during an outage.
Support for Everyday Devices
Pure sine wave output is suitable for many common electronic devices when their electrical requirements match the inverter specifications. For example, you may plan to power lights, fans, networking equipment, and other essential loads. Always check appliance compatibility before use.
Plan Your Backup Requirements
Your backup time depends on battery capacity, connected load, and inverter efficiency. A larger load generally uses stored energy faster. For this reason, list the appliances you need to operate and estimate their total power consumption before selecting a battery.
Designed for Residential Backup
The inverter can form part of a home backup system when installed with suitable components. Use correctly rated cables, suitable electrical protection, and a compatible battery. Also, keep the unit away from moisture and allow enough space for ventilation.
Make an Informed Purchase
The YOHAKO 2KVA 12V Pure Sine Wave Inverter can help supply power to selected appliances during electricity interruptions. However, the actual supported load depends on its confirmed output rating. Check the product datasheet and seller details before ordering.
Choose a setup that matches your energy needs for safe and practical operation.
YOHAKO 3.5KVA 24V MPPT Hybrid Inverter 80A MPPT controller
YOHAKO 3.5KVA 24V MPPT Hybrid Inverter 80A MPPT Controller for Home Solar Systems
Looking for a practical inverter for a residential solar installation? The YOHAKO 3.5KVA 24V MPPT Hybrid Inverter 80A MPPT Controller combines power conversion and solar battery charging in one unit. Its 3.5KVA rating makes it suitable for selected household and small commercial applications. The right system configuration can help users make better use of available solar energy.
Built-In 80A MPPT Technology
The integrated 80A MPPT controller manages charging from compatible solar panels. It tracks the array’s maximum power point to improve energy harvesting under suitable operating conditions. Consequently, the system can make better use of changing sunlight throughout the day.
Furthermore, the built-in controller helps simplify system planning. Users do not need an additional solar charge controller when the integrated unit meets their installation requirements. Always check the maximum PV voltage, supported solar power, and charging current before connecting panels.
Designed for Everyday Electricity Needs
A 24V battery system can support compatible solar installations for selected household loads. For example, users may plan power for lights, fans, routers, and other suitable equipment. However, the total demand must remain within the inverter’s output rating.
Solar panels can generate electricity during daylight hours. The inverter can then convert suitable power for connected appliances while managing battery charging according to its design. At night, a compatible battery may supply stored energy. Actual backup time depends on battery capacity, appliance consumption, and system efficiency.
Useful Features for Solar Planning
This hybrid inverter suits users who want to combine solar generation and battery storage. Its integrated design can help reduce separate equipment requirements. In addition, a carefully planned installation can support better energy management and daily convenience.
For reliable results, select batteries that match the inverter’s voltage and charging requirements. Use appropriate cables, protective devices, and installation methods. Also, consider appliance starting currents because motors and compressors may require extra power.
Make the Most of Solar Energy
The YOHAKO 3.5KVA 24V MPPT Hybrid Inverter 80A MPPT Controller provides a practical foundation for a compatible solar power setup. Before purchasing, confirm its operating modes, grid compatibility, battery settings, and solar input specifications. These details help ensure that the equipment matches your needs.
With suitable components and professional installation, users can build a solar system for everyday electricity requirements. Careful planning also supports safe operation and dependable long-term use.
YOHAKO 3.5KVA 24V Pure Sine Wave Inverter High-efficiency inverter
YOHAKO 3.5KVA 24V Pure Sine Wave Inverter for Efficient Energy Management
Reliable electricity helps homes and workplaces run smoothly. The YOHAKO 3.5KVA 24V Pure Sine Wave Inverter provides a useful option for compatible backup and solar power systems. It converts DC battery energy into AC electricity for connected appliances. Additionally, its pure sine wave output supports many electronic devices that need a stable power supply.
Smooth and Consistent Power Output
Pure sine wave technology delivers a smooth AC waveform. This makes the inverter suitable for many common electrical appliances. For instance, users can plan to power lighting, televisions, routers, and compatible fans. However, every appliance must meet the inverter’s voltage and power requirements.
High-efficiency power conversion helps limit energy losses during operation. Consequently, users can make better use of available battery energy. Actual efficiency depends on the operating load, battery condition, and installation quality.
Flexible Applications for Daily Life
The 3.5KVA rating suits selected homes, offices, shops, and small workspaces. Users can select compatible appliances according to their electricity requirements. Moreover, a properly sized battery can provide backup when the main supply becomes unavailable.
The 24V configuration requires a compatible battery system. Therefore, buyers should confirm the battery voltage and connection requirements before purchasing. They should also calculate total appliance demand to avoid overloading the inverter.
Support for Solar Power Systems
Users can integrate this inverter into a suitable solar setup when the required charging equipment and connections are available. Solar panels can generate electricity during daylight hours. A compatible charging system can then store energy in the battery for later use.
The YOHAKO 3.5KVA 24V Pure Sine Wave Inverter can form part of an energy management solution for everyday power needs. However, users should verify solar compatibility and charging requirements before connecting additional equipment.
Choose the Right Setup
Start by listing the appliances you want to operate. Next, calculate their combined running power and starting demand. This step helps you choose a suitable system configuration. Also, select appropriate cables and protective devices to support safe operation.
Battery capacity affects backup duration. Meanwhile, appliance usage determines how quickly stored energy runs out. For this reason, realistic energy planning can improve the overall experience.
With suitable equipment and professional installation, this inverter can support a practical backup power solution. It offers a useful choice for users who want smooth power conversion and a well-planned electrical system.
YOHAKO 300W All-in-One Solar Street Light Municipal lighting solution
Practical Solar Lighting for Public Infrastructure
Integrated Design and Convenient Installation
The 300W All-in-One Solar Street Light offers a convenient option for municipal and commercial outdoor lighting projects. Its integrated construction helps simplify installation and reduces the need for extensive electrical wiring. In addition, its compact design provides a clean and organized appearance across different outdoor environments.
This solar lighting solution can be used for streets, public parking areas, community entrances, pedestrian routes, and selected commercial locations. It is also useful for projects that aim to reduce dependence on conventional electricity while making use of renewable energy.
Sustainable Lighting for Everyday Needs
Solar street lighting converts sunlight into electrical energy during the day and stores it in a battery for nighttime use. This process supports outdoor illumination without requiring a continuous grid electricity supply.
The 300W All-in-One Solar Street Light can help improve visibility in public spaces and outdoor areas. However, actual performance depends on battery capacity, solar panel output, installation height, weather conditions, and lighting settings.
For optimal results, choose a location with direct sunlight and suitable light coverage. Keep the solar panel clean to support efficient charging. For municipal installations, consider road width, pole height, spacing, and required illumination levels before selecting the final setup.
With its integrated design and solar-powered operation, this lighting system offers a practical option for municipal, residential, and commercial outdoor lighting projects.
YOHAKO 300W Mono Solar Panel Monocrystalline panel
A Practical Choice for Solar Installations
Clean Power for Different Energy Needs
The 300W Mono Solar Panel offers a useful option for people who want to use renewable energy. It generates electricity from sunlight without fuel consumption during normal operation. As a result, it can help reduce reliance on conventional energy sources.
You can consider this module for small homes, outdoor lighting, remote equipment, and selected off-grid applications. Furthermore, combining compatible panels can increase the total system capacity. However, calculate your energy needs before deciding how many panels to install.
Simple Maintenance and Installation
Solar panels require little routine maintenance. First, clean the surface with suitable materials. Next, check the mounting hardware and electrical connections. Also, avoid placing the panel where trees or nearby structures create excessive shade.
Proper mounting supports safe operation. Therefore, use compatible brackets and follow installation instructions. In addition, ask a qualified professional to handle electrical connections when necessary.
Choose Compatible Solar Equipment
Before purchasing, review the panel’s dimensions, voltage, current, and connector type. These details help confirm compatibility with your existing system. Finally, consider daily sunlight hours and energy consumption to plan an effective installation.
Overall, this solar module offers a practical option for renewable energy projects. With suitable components and proper installation, it can contribute to dependable electricity generation for everyday use.
YOHAKO 330W Mono Solar Panel Residential solar panel
A Practical Choice for Home Solar Systems
Clean Energy for Modern Homes
The 330W Mono Solar Panel provides a useful option for homeowners seeking renewable electricity. It generates power from sunlight without fuel consumption during normal operation. As a result, it can help lower dependence on conventional energy sources.
You can consider this module for home rooftops, garden buildings, remote equipment, and suitable backup systems. Furthermore, combining compatible panels can increase total solar capacity. Calculate your daily electricity needs before choosing the number of modules.
Easy Maintenance and Safe Installation
Solar panels require little routine maintenance. First, clean the surface using suitable materials. Next, check the mounting hardware and electrical connections. Also, avoid locations where trees or nearby structures create excessive shade.
Proper mounting supports safe operation. Therefore, use compatible brackets and follow installation instructions. In addition, consult a qualified installer when handling electrical connections or designing a complete solar system.
Choose the Right Components
Before purchasing, review the panel’s dimensions, voltage, current, and connector type. These details help confirm compatibility with your existing equipment. Finally, consider daily sunlight hours and household energy consumption.
Overall, this solar module offers a practical way to support residential renewable energy projects. With suitable components and careful installation, it can contribute to dependable solar electricity generation.
YOHAKO 350W Mono Solar Panel High-performance PV module
A Practical Solution for Renewable Energy
Clean Electricity for Modern Solar Systems
The 350W Mono Solar Panel provides a useful option for people seeking renewable electricity. It generates power from sunlight without fuel consumption during normal operation. As a result, it can help reduce reliance on conventional energy sources.
You can consider this module for home rooftops, small offices, remote equipment, and suitable off-grid projects. Furthermore, combining compatible panels increases total system capacity. Calculate your daily energy needs before deciding how many panels to install.
Simple Maintenance and Safe Installation
Solar panels require little routine maintenance. First, clean the surface with suitable materials. Next, inspect the mounting hardware and electrical connections. Also, avoid locations where nearby trees or buildings create excessive shade.
Proper mounting supports safe operation. Therefore, use compatible brackets and follow installation instructions. In addition, consult a qualified professional when connecting electrical equipment or designing a complete solar system.
Choose Compatible Components
Before purchasing, review the panel’s dimensions, voltage, current, and connector type. These details help confirm compatibility with your existing setup. Also, consider daily sunlight hours and energy consumption when planning your system.
Overall, this solar module offers a practical option for renewable energy projects. With suitable components and careful installation, it can contribute to dependable solar electricity generation.
YOHAKO 3HP AC/DC Solar Water Pump High-flow solar pump
3HP AC/DC Solar Water Pump for Water Transfer
Reliable water movement is important for farms, irrigation systems, and other properties with regular water supply needs. The 3HP AC/DC Solar Water Pump High-Flow Solar Pump offers a practical option for compatible pumping applications. Its power rating makes it suitable for consideration in projects that require more pumping capacity than smaller systems can provide.
Make Better Use of Solar Energy
Solar-powered pumping uses sunlight to operate a compatible water pump. This approach can reduce dependence on grid electricity when sunlight is sufficient. AC/DC compatibility may provide additional power flexibility, depending on the system design. Confirm the input voltage, controller specifications, and recommended solar panel arrangement before connecting the equipment.
Support Irrigation and Water Transfer
This pump can be considered for agricultural watering, moving water into storage tanks, and other suitable water transfer tasks. Its actual output depends on the required pumping head, water source, pipe length, and operating pressure. Checking these factors helps ensure that the pump meets your project’s requirements.
Installation and System Compatibility
Before installation, calculate the total lifting height and estimate the required water volume. Select compatible pipes, electrical protection, and solar equipment according to the manufacturer’s guidance. Also, confirm whether the pump is designed for surface or submersible installation to avoid using it incorrectly.
Maintain Reliable Operation
Regular inspection can help identify leaks, blockages, damaged cables, and loose connections. Keep electrical controls protected from moisture and operate the pump within its specified limits. Professional installation can improve safety and help maintain dependable performance.
A Practical Choice for Solar Pumping
The 3HP AC/DC Solar Water Pump High-Flow Solar Pump can support suitable water management projects while making use of renewable energy. Its effectiveness depends on proper system sizing, installation, and operating conditions. Before purchasing, verify the rated flow rate, maximum pumping head, voltage, and power requirements to ensure the pump suits your needs.
Online store with a wide selection of furniture and decor
Furniture is an invariable attribute of any room. It is they who give it the right atmosphere, making the space cozy and comfortable, creating favorable conditions for productive work or helping to relax after a hard day. More and more often, customers want to place an order in an online store, when you can sit down at the computer in your free time, arrange the furniture in the photo and calmly buy the furniture you like. The online store has a large catalog of furniture: both home and office furniture are available.
Furniture production is a modern form of art
Furniture manufacturers, as well as manufacturers of other home goods, are full of amazing offers: we often come across both standard mass-produced products and unique creations - furniture from professional craftsmen, which will be appreciated by true connoisseurs of beauty. We have selected for you the best models from modern craftsmen who managed to ingeniously combine elegance, quality and practicality in each product unit. Our assortment includes products from proven companies. Who for many years of continuous joint work did not give reason to doubt their reliability and honesty. All of them guarantee the high quality of their products, excellent operational characteristics, attractive appearance of the products, a long period of use of the furniture, as well as safety.