ECOFLOW BRAND
Filter by price
Stock status
Showing 1–12 of 98 results
ECOFLOW 100W Flexible Solar Panel Lightweight bendable PV module
Use sunlight with the ECOFLOW 100W Flexible Solar Panel, designed for installations where a conventional rigid panel may not fit well. Its lightweight body and bendable construction make it an option for compatible van roofs, recreational vehicles, and other curved mounting surfaces. The 100W rated output provides a solar energy source for supported portable power stations and solar charging systems.
At approximately 2.3 kg, this panel is easier to carry and position than many rigid alternatives. Its flexible structure can curve up to 258 degrees, allowing it to follow surfaces when mounted correctly. This can help users make use of roof space without adding the bulk of a traditional framed module. Follow the installation guide because excessive bending, impact, or walking on the panel may damage its cells.
This Flexible Solar Panel features 182 monocrystalline silicon cells and a stated conversion efficiency of about 23 percent. These cells convert sunlight into electrical energy for compatible equipment. Solar production changes throughout the day, so the panel may deliver less than its rated output in cloudy weather, shade, or poor positioning. Keep it exposed to direct sunlight where possible and avoid objects that cast shadows across the cells.
Outdoor readiness is supported by protective construction and an IP68 rating tested under specified conditions. An ETFE film helps protect the panel surface outdoors. However, no solar panel should be treated as indestructible. Inspect the surface and connectors regularly, remove dust with suitable soft materials, and follow the manufacturer’s cleaning and storage instructions.
Mounting options include pre-cut eyelets for hooks. Depending on the surface, a compatible adhesive may also work. The panel can be part of a larger setup, but any series or parallel connection must match the limits of the charge controller, wiring, and power station. Check the system voltage and current ratings before adding more panels.
The Flexible Solar Panel can suit travellers, van owners, and outdoor users who want renewable charging without a heavy rigid module. It may also help supplement a mobile power setup when paired with compatible equipment. Before purchase, confirm the available roof area, mounting method, cable requirements, and device compatibility.
If you need a lightweight panel for a curved surface, this 100W model offers a convenient option. Careful installation, good sunlight exposure, and routine maintenance can help you get dependable performance from your solar charging setup for travel and backup power applications today.
ECOFLOW 100W Flexible Solar Panel Lightweight flexible PV module
Discover Convenient Solar Energy
The ECOFLOW 100W Flexible Solar Panel provides a lightweight way to collect renewable energy for mobile and off-grid applications. With a rated output of 100 watts, this solar module can help charge compatible portable power stations and support suitable solar energy systems. Its flexible construction makes it especially useful for curved mounting surfaces where conventional rigid panels may not fit properly.
Lightweight Construction for Mobile Use
This Flexible Solar Panel weighs approximately 2.3 kg, making it easier to transport and position than many traditional rigid modules. It can bend up to 258 degrees, allowing installation on suitable curved surfaces such as compatible camper van and recreational vehicle roofs.
Its slim profile also helps users make better use of limited mounting space. The panel measures approximately 105.5 × 61.2 × 2.5 cm. These dimensions provide a practical balance between portability and solar collection area.
Pre-cut eyelets offer convenient mounting options. Depending on the application, users can choose suitable hooks or an approved adhesive method. However, the mounting surface must support the installation securely and safely.
Reliable Solar Cell Performance
The panel contains 182 monocrystalline silicon cells and offers approximately 23% conversion efficiency. Under suitable sunlight conditions, these cells convert solar radiation into electricity for compatible equipment.
Its rated output is 100W, with a maximum operating voltage of 17.1V and a maximum operating current of 5.9A. The open-circuit voltage is 20.3V. These specifications help users determine whether the module matches their charging equipment.
Actual output changes throughout the day. Cloud cover, shading, temperature, orientation, and seasonal sunlight can affect charging performance. For this reason, proper positioning can improve energy collection.
Designed for Outdoor Applications
A protective ETFE film helps protect the solar cells from environmental exposure. The module also carries an IP68 rating under specified laboratory conditions. Even so, users should inspect cables, connectors, and mounting points regularly.
Flexible Solar Charging for Everyday Needs
This Flexible Solar Panel suits compatible portable power stations, camper vans, recreational vehicles, and selected off-grid installations. It can also be combined with additional panels when the connected controller or power station supports the required electrical configuration.
Before connecting multiple modules, confirm the permitted voltage, current, and connection method. Use compatible cables and follow the equipment manufacturer’s safety instructions.
Choose this 100W solar module when portability, adaptable mounting, and renewable energy collection are important. Its lightweight design and flexible construction offer a practical alternative to rigid panels in suitable applications. With correct installation and realistic expectations about sunlight, it can provide useful solar charging for travel, outdoor activities, and everyday mobile power needs.
ECOFLOW 100W Rigid Solar Panel Monocrystalline PV module
Dependable Solar Power for Everyday Needs
The ECOFLOW 100W Rigid Solar Panel is designed to provide convenient renewable electricity for fixed and off-grid applications. Its 100W rated output makes it suitable for compatible solar power systems, portable power stations, and selected vehicle installations. The rigid structure provides a stable mounting solution for users who prefer a permanent solar setup.
High-Efficiency Monocrystalline Technology
This Rigid Solar Panel features monocrystalline silicon cells with up to 23% conversion efficiency. The cells convert sunlight into electrical energy, helping users collect renewable power from a compact panel. Its performance makes it useful for small solar installations and systems that can accommodate multiple panels.
Solar generation changes with weather and installation conditions. Direct sunlight generally provides better output than shaded or cloudy locations. Therefore, choose a suitable mounting position and keep nearby obstructions to a minimum.
Strong Construction for Outdoor Use
The panel uses an anti-corrosive aluminium frame for structural support. Tempered glass and protective lamination help shield the solar cells from environmental exposure. Together, these materials support durability during regular outdoor operation.
Its IP68 water and dust resistance rating offers additional protection under specified laboratory conditions. Even so, inspect the panel, cables, and connectors regularly. Follow the installation instructions to maintain the intended protection.
Convenient Mounting Options
Pre-drilled mounting holes help simplify installation on compatible surfaces. This makes the panel suitable for selected recreational vehicles, fixed solar frames, and off-grid structures. Use appropriate mounting hardware to secure the panel properly.
Once installed, the panel can collect sunlight without needing to be unfolded or repositioned for every charging session. This makes it a practical option for users who want a consistent solar charging arrangement.
Compatible Solar System Integration
The ECOFLOW 100W Rigid Solar Panel can work with compatible solar controllers and portable power stations. You can also connect multiple panels when your system supports their combined electrical output.
Before connecting the module, verify the operating voltage, current limits, and connector type. A suitable charge controller helps manage the solar input for compatible battery systems. Always follow the equipment manufacturer’s instructions.
Make Renewable Energy Part of Your Setup
This Rigid Solar Panel combines a compact 100W output, efficient solar cells, and durable mounting features. It is suitable for users who want to expand a solar installation or establish a small off-grid power system.
With a secure mounting position and adequate sunlight, the panel can provide useful renewable electricity for compatible equipment. Its robust construction and simple installation options make it a practical choice for long-term solar energy collection at home or on the road.
ECOFLOW 110W Portable Solar Panel Foldable solar charging panel
Enjoy Solar Charging Anywhere
The ECOFLOW 110W Portable Solar Panel offers a convenient way to generate electricity from sunlight. Its foldable construction makes it suitable for users who need portable energy during camping, road trips, and outdoor adventures. With a rated output of 110 watts, it can recharge compatible portable power stations when sunlight and operating conditions are suitable.
Compact Storage and Easy Setup
This Portable Solar Panel is designed to simplify transportation and daily use. Its folding structure helps reduce the space needed for storage. You can carry it with your outdoor equipment and unfold it when you reach a suitable sunny location.
The included carrying case doubles as a support stand. Therefore, you can position the panel at a useful angle without installing a permanent mounting system. Proper positioning helps the solar cells receive more direct sunlight and improves energy collection.
High-Efficiency Solar Cells
The panel uses monocrystalline silicon solar cells for efficient sunlight conversion. The original model offers approximately 22% to 23% conversion efficiency, depending on the applicable specifications. Its 110W rated power makes it a useful companion for compatible portable power stations.
Solar charging performance changes with weather and environmental conditions. Direct sunlight generally provides better results than cloudy conditions or shaded locations. For this reason, keep the panel clear of obstructions whenever possible.
Suitable for Outdoor Activities
A Portable Solar Panel can provide useful charging support during travel and outdoor activities. This model can help replenish compatible power stations used for lighting, mobile devices, and other supported electronics.
It is also useful for backyard activities and temporary off-grid setups. Since the panel folds for storage, you can move it between locations instead of leaving it permanently installed. This flexibility makes solar energy more accessible for occasional use.
Simple Care and Safe Connections
Regular care helps preserve the panel’s performance. Remove dust and dirt with an appropriate soft cloth, and avoid damaging the solar surface during cleaning. Fold the panel carefully and store it in its carrying case after use.
Before connecting the panel, confirm that your power station supports its voltage, current, and connector type. Use compatible cables and follow the equipment instructions. Never assume that every solar generator accepts the same input specifications.
Make Better Use of Renewable Energy
The ECOFLOW 110W Portable Solar Panel combines a compact folding design with dependable solar charging potential. It suits travellers, campers, and users who need a portable source of renewable energy. With suitable sunlight, correct positioning, and compatible equipment, this panel can help you charge essential devices while reducing dependence on conventional electricity sources.
ECOFLOW 125W Flexible Solar Panel Flexible monocrystalline panel
Flexible Monocrystalline Solar Panel for Portable Power
The 125W Flexible Solar Panel offers a convenient way to collect solar energy in applications where traditional panels may be difficult to install. Its monocrystalline cells support solar electricity generation, while its flexible construction provides more mounting options on compatible surfaces.
Efficient Use of Available Sunlight
This 125W Flexible Solar Panel has a rated output of 125 watts under standard test conditions. Its actual performance varies with weather, sunlight intensity, temperature, and installation angle.
For improved results, select a location with minimal shading. In addition, position the panel according to the manufacturer’s installation guidelines.
Designed for Flexible Applications
The flexible construction makes this panel suitable for certain curved or weight-sensitive surfaces. It can be considered for compatible boats, recreational vehicles, and portable solar installations.
However, flexibility does not mean the panel can bend in any direction. Always follow the specified bending limits and mounting instructions to avoid damage.
Supports Compatible Battery Charging
The 125W Flexible Solar Panel can form part of a suitable solar charging system. When paired with a compatible charge controller, it may provide energy for charging an appropriate battery.
Check the electrical specifications before connecting any equipment. The controller, battery, and wiring must match the panel’s voltage and current requirements.
Simple Solar Power for Everyday Needs
Solar energy can help reduce dependence on other power sources when sunlight is available. This panel provides an option for users who need a compact solar module for specific off-grid applications.
Keep the panel clean and inspect its connections regularly. Proper installation also helps protect the panel from unnecessary stress.
Overall, the 125W Flexible Solar Panel is a useful option for suitable mobile and space-conscious solar systems. Its 125-watt rating and flexible design make it worth considering for compatible solar power projects.
ECOFLOW 160W Bifacial Portable Solar Panel Double-sided solar panel
The 160W Bifacial Solar Panel is a convenient solar charging solution for people who need portable energy at home or outdoors. Its double-sided construction allows the panel to collect sunlight from the front and reflected light from the rear. This design can increase total energy collection when the panel receives enough reflected sunlight.
Advanced Bifacial Solar Design
The ECOFLOW 160W Bifacial Solar Panel combines modern solar technology with a portable structure. Its front surface collects direct sunlight, while the rear surface captures additional light reflected from the ground and nearby surroundings. Therefore, choosing the right installation location can improve energy generation.
For better results, place the panel in an open area with minimal shade. A bright surface beneath the panel may also help increase rear-side light collection. However, the actual energy gain depends on the surface, sunlight conditions, and panel position.
Portable and Easy to Position
This portable solar panel is suitable for camping, road trips, outdoor activities, and off-grid charging. Its foldable design makes transportation and storage more convenient. You can set it up in a sunny location and adjust its position to receive more direct sunlight.
Furthermore, a compatible portable power station can store the collected solar energy for later use. This setup can support selected electronic devices and other compatible equipment, depending on the power station’s capacity and output limits.
Reliable Solar Charging Performance
With a rated power of 160 watts, this panel provides a practical option for everyday portable solar charging. Its actual output changes with sunlight intensity, weather, temperature, shading, and installation angle. Consequently, clear skies and correct positioning can help improve charging performance.
The double-sided design also offers flexibility in outdoor environments where reflected sunlight is available. Keep both surfaces clean and avoid placing the rear side directly against an opaque surface. This helps the panel receive light from both directions.
A Smart Choice for Outdoor Energy
The ECOFLOW 160W Bifacial Solar Panel is suitable for users seeking a portable and adaptable solar energy solution. It combines convenient transportation with the potential for additional energy collection through its rear surface.
Whether you are preparing for camping, traveling in a vehicle, or building a portable backup setup, this panel offers a useful way to collect renewable energy. Pair it with compatible charging equipment and follow the manufacturer’s instructions for safe connections.
Overall, the 160W Bifacial Solar Panel supports flexible outdoor charging while making better use of available sunlight. Its performance depends on proper placement and suitable environmental conditions. Choose an appropriate setup to get the most from your portable solar charging system.
ECOFLOW 160W Portable Solar Panel Foldable monocrystalline panel
Discover Flexible Solar Charging
The ECOFLOW 160W Portable Solar Panel is designed for people who need renewable electricity away from traditional power outlets. Its foldable structure allows convenient transportation, while its 160W rated output supports compatible portable power stations. This makes it useful for camping, road travel, outdoor work, and selected off-grid applications.
Advanced Monocrystalline Technology
A Portable Solar Panel collects sunlight and converts it into electrical energy through photovoltaic cells. This model uses monocrystalline silicon technology to support efficient solar generation. The original version provides approximately 21% to 22% conversion efficiency, while newer versions may offer improved performance.
Solar production varies throughout the day. Bright sunlight generally delivers better results than cloudy weather or shaded conditions. Therefore, choose an open location and adjust the panel’s position whenever practical.
Easy Transportation and Setup
The foldable design helps make solar charging more convenient. You can fold the panel after use and store it in its carrying case. This reduces storage space and makes transportation easier during outdoor trips.
The original model’s carrying case also works as a support stand. It allows you to position the panel at a suitable angle toward the sun. Consequently, setup is straightforward, and no permanent rooftop installation is required for portable use.
Built for Outdoor Activities
This Portable Solar Panel suits camping, recreational vehicles, outdoor adventures, and temporary power arrangements. It can recharge compatible power stations that provide electricity for supported electronics and small appliances.
Its protective construction helps support outdoor operation. However, exact water and dust resistance depends on the model version. Check the product label and manual before using the panel in wet conditions.
Simple Maintenance and Safe Operation
Regular maintenance helps preserve solar performance. Remove dust with a soft cloth and inspect cables and connectors before use. Fold the panel carefully, and store it in a suitable location when charging is complete.
Always verify compatibility before connecting the panel to a power station. The supported voltage, current, and connector type must match the receiving equipment. Also, follow the manufacturer’s instructions when connecting multiple panels together.
Make Solar Energy More Accessible
The ECOFLOW 160W Portable Solar Panel offers a useful combination of portability and solar charging capacity. Its foldable construction makes it easy to carry, while its monocrystalline cells help convert available sunlight into electricity.
Whether you are preparing for a camping trip or building a portable energy setup, this panel can provide convenient renewable power. Choose the correct model, position it carefully, and connect it to compatible equipment for a practical solar charging experience.
ECOFLOW 175W Rigid Solar Panel High-efficiency monocrystalline module
Reliable Solar Energy for Everyday Needs
The ECOFLOW 175W Rigid Solar Panel is designed for users who need dependable renewable electricity for fixed and off-grid applications. Its 175W rated output supports compatible solar power systems, portable power stations, and selected vehicle installations. The rigid frame provides a stable mounting solution for long-term solar energy collection.
Efficient TOPCon Solar Cells
This Rigid Solar Panel features N-type TOPCon monocrystalline silicon cells with up to 25% conversion efficiency. This advanced technology helps transform sunlight into usable electricity while making effective use of the panel’s surface area.
Solar generation varies with weather, temperature, and installation conditions. Direct sunlight generally provides better results than shaded locations. Therefore, choose a suitable installation area and keep surrounding obstructions to a minimum.
Built for Outdoor Conditions
The panel combines an anti-corrosive aluminium frame with tempered glass and protective lamination. This construction helps protect the solar cells during regular outdoor operation. Its IP68 water and dust resistance rating provides additional protection under specified testing conditions.
For long-term performance, inspect the panel and its electrical connections regularly. Follow the manufacturer’s instructions for cleaning, handling, and installation. Proper maintenance can help preserve the panel’s condition.
Simple and Secure Mounting
Pre-drilled mounting slots help simplify installation on compatible surfaces. This design makes the panel suitable for recreational vehicles, fixed solar frames, and selected off-grid structures. Use suitable mounting hardware to secure it firmly.
Once installed, the panel can collect sunlight without needing to be folded or repositioned for every charging session. This makes it a practical option for users who want a permanent solar charging arrangement.
Flexible System Compatibility
The ECOFLOW 175W Rigid Solar Panel can connect to compatible solar controllers and portable power stations. It can also be combined with additional panels when the connected equipment supports the required electrical configuration.
Before connecting the module, verify the voltage, current limits, and connector type. Proper compatibility helps support safe charging and reliable system operation. Always follow the equipment manufacturer’s instructions.
Make Renewable Energy Part of Your Setup
This Rigid Solar Panel combines a useful power rating, efficient TOPCon technology, and a durable frame. It is suitable for people who want to expand their solar installation or build a small off-grid power system.
With secure mounting and sufficient sunlight, the panel can provide useful renewable electricity for compatible equipment. Its straightforward installation and outdoor-ready construction make it a practical choice for long-term solar applications at home or on the road.
ECOFLOW 220W Bifacial Portable Solar Panel Double-sided solar panel
Reliable Portable Solar Charging
The ECOFLOW 220W Bifacial Portable Solar combines portable construction with double-sided solar technology. It is designed for users who need a convenient way to collect solar energy away from traditional power outlets. With a 220W rated output on the front surface, it can provide energy for compatible portable power stations under suitable conditions.
The Bifacial Solar Panel also collects light through its rear surface. This feature can increase total energy generation when reflected sunlight reaches the back of the panel. Therefore, positioning and surrounding surfaces play an important role in its overall performance.
Designed for Travel and Outdoor Activities
Carrying heavy equipment can make outdoor trips less convenient. Fortunately, this foldable solar panel offers a practical design for transportation and storage. You can unfold it at your campsite, on a road trip, or at another sunny location.
The Bifacial Solar Panel works well for camping, recreational vehicles, outdoor exploration, and other activities where portable electricity is useful. It can recharge compatible power stations during daylight hours, helping you maintain access to stored energy when needed.
Before purchasing, check that your power station supports the panel’s electrical specifications. Compatible connectors and suitable solar input limits are essential for safe operation.
Monocrystalline Technology and Performance
The panel uses monocrystalline silicon solar cells for efficient sunlight conversion. Actual energy production varies with weather, shading, installation angle, and sunlight exposure. The front side provides a rated output of 220W, while the rear side can generate additional electricity under suitable conditions.
For this reason, placing the panel in direct sunlight can help improve charging performance. Additionally, allowing reflected light to reach the rear surface can support its double-sided operation.
Flexible Energy for Different Needs
Portable solar charging offers greater flexibility for people who spend time outdoors. Instead of depending entirely on wall outlets, you can collect energy from sunlight and store it in a compatible power station.
The ECOFLOW 220W Bifacial Portable Solar is a useful choice for travellers, campers, and users seeking an alternative charging source. Its folding design supports convenient transport, while its double-sided construction provides another way to capture solar energy.
Choose the Bifacial Solar Panel for practical outdoor charging and renewable energy collection. With suitable equipment, proper positioning, and good sunlight, it can help support your portable energy needs.
ECOFLOW 220W Portable Solar Panel N-Type bifacial solar panel
Generate More Power from Sunlight
The 220W Bifacial Solar Panel is designed for users who need efficient, portable renewable energy. It combines a 220W front side with a rear side rated at 175W under specified test conditions. This dual-sided design allows the panel to collect direct sunlight and reflected light for additional energy generation.
Up to 25% Conversion Efficiency
Advanced N-type TOPCon monocrystalline cells provide up to 25% conversion efficiency. These cells help convert sunlight into electricity from a compact, foldable surface. Therefore, the panel offers an effective charging solution for compatible portable power stations and selected off-grid applications.
Actual solar output changes with weather, temperature, shading, and installation conditions. Furthermore, the rear side performs best when it receives sufficient reflected light from a suitable surface. Proper positioning can improve energy collection throughout the day.
Adjustable Stand and Easy Setup
This Bifacial Solar Panel features an integrated adjustable stand with angles between 30 and 60 degrees. Users can adjust the panel to face the sun more directly. Its integrated solar angle guide also helps achieve better alignment during setup.
The foldable construction supports convenient storage and transportation. You can carry the panel to campsites, outdoor work locations, and temporary power setups. When charging is complete, fold it carefully and store it in a suitable protective bag.
Designed for Outdoor Conditions
An IP68 water and dust resistance rating supports outdoor use when the panel is handled according to the manufacturer’s instructions. Its construction helps protect the unit against environmental exposure. However, always inspect cables and connectors before use, and avoid damaging the panel during transport.
Flexible Charging Applications
Use this Bifacial Solar Panel with compatible portable power stations for camping, travel, and selected off-grid activities. It can help supply energy for supported electronics, lighting, and other equipment connected through a suitable power station.
The front side provides 220W of rated power, while the rear side offers 175W under specified conditions. The open-circuit voltage is 21.5V, and the optimal operating voltage is 18.4V. Check your equipment’s solar input limits before making connections.
Make Renewable Energy More Accessible
This portable solar module combines efficient cell technology, dual-sided energy collection, and an adjustable folding design. It suits users who want flexible charging without a permanent solar installation. For better performance, choose an open location, minimise shading, and allow reflected light to reach the rear surface. With compatible equipment and suitable sunlight, this panel provides a practical way to support portable power needs.
ECOFLOW 400W Portable Solar Panel Foldable solar charging panel
Reliable Solar Charging Wherever You Go
The ECOFLOW 400W Portable Solar Panel is designed for users who need powerful solar charging away from traditional electricity sources. Its 400W rated output makes it suitable for compatible portable power stations and selected off-grid applications. Whether you are camping, travelling, or working outdoors, this panel helps turn sunlight into useful electrical energy.
High-Efficiency Solar Technology
This Portable Solar Panel uses monocrystalline silicon cells with a conversion efficiency of up to 23% in the original model. These cells help collect solar energy across the panel’s large surface. Consequently, the panel can provide useful charging power when sunlight conditions are favourable.
Actual energy production varies with weather, temperature, shading, and panel angle. Place the panel in an open location for better exposure to sunlight. Adjusting its position can also help improve energy collection throughout the day.
Easy Transportation and Adjustable Positioning
The foldable design helps make transportation and storage more convenient. You can unfold the panel when charging is needed and pack it away after use. This feature is especially useful for road trips, campsites, and temporary outdoor installations.
The original model includes a protective case that doubles as a supporting stand. It allows you to position the panel toward the sun without permanent mounting. This practical design helps simplify setup at different outdoor locations.
Built for Outdoor Applications
The panel uses protective materials designed to support outdoor solar charging. Its layered construction helps protect the solar cells during normal handling and use. The original model carries an IP67 protection rating, while the lightweight NextGen version offers different specifications.
For long-term use, keep the surface clean and inspect the cables regularly. Store the folded panel carefully and avoid excessive pressure during transportation. Always follow the manufacturer’s instructions for weather exposure and maintenance.
Compatible Portable Power Solutions
This Portable Solar Panel can recharge compatible power stations and support selected off-grid energy systems. It is useful for charging supported electronics, running suitable equipment through a power station, and collecting renewable energy during outdoor activities.
Check the solar input limits and connector type of your equipment before making a connection. Using compatible equipment helps ensure safe operation and reliable performance.
Make Better Use of Renewable Energy
The ECOFLOW 400W Portable Solar Panel combines high rated power, efficient solar cells, and a convenient folding structure. It offers a flexible solution for people who need portable electricity while travelling or spending time outdoors. With proper positioning and suitable sunlight, this panel can help recharge compatible power stations and reduce dependence on conventional electricity sources.
ECOFLOW 400W Rigid Solar Panel High-power monocrystalline module
High-Power Solar Generation
The Rigid Solar Panel is designed for solar installations that need a strong reliable solar power rating in a fixed panel format. Its 400W rated output helps convert sunlight into electricity for compatible residential, business, and off-grid systems. It offers a practical way to add renewable energy capacity to a well-planned solar installation.
Efficient Monocrystalline Technology
Monocrystalline cells provide effective solar conversion, with a rated efficiency of up to 23%. This helps the Rigid Solar Panel use available roof or mounting space. Energy production still varies with weather, sunlight hours, orientation, temperature, and shade. For improved results, choose a location with sun exposure throughout the day.
Durable Rigid Construction
The firm panel structure is suited to fixed mounting on compatible frames and rooftops. Its dimensions are 172.2 × 113.4 × 3.5 cm, and it weighs approximately 21.8 kg. Plan the installation carefully and ensure that the mounting surface can support the panel safely. Professional installation can help maintain correct positioning and secure connections.
Flexible Solar System Planning
Use the Rigid Solar Panel as part of a larger solar array for a home, office, or remote property. When the system design permits, multiple panels can provide a higher total generation capacity. Pair the panel with compatible electrical equipment and storage if you need to use collected energy later. Before installation, check all system ratings and connection requirements.
Technical Specifications
Rated power: 400W. Cell technology: monocrystalline. Conversion efficiency: up to 23%. Open-circuit voltage: 37.10V. Maximum operating voltage: 31.00V. Maximum operating current: 12.90A. Short-circuit current: 13.79A. Maximum fuse current: 25A. Maximum system voltage: 1500V DC (UL). Dimensions: 172.2 × 113.4 × 3.5 cm. Weight: 21.8 kg. Connector: solar connector. Refer to official documentation for the correct installation method and electrical limits.
Support Your Clean Energy Goals
A Rigid Solar Panel can help lower dependence on grid electricity when combined with a suitable system and local sunlight conditions. It can also support energy planning for properties that want to increase renewable power generation. Keep the panel surface clean, inspect cables, and avoid shade from nearby trees or buildings. In addition, ask a qualified installer to confirm array layout, inverter compatibility, and protective equipment before switching the system on. The right design can help you get more value from the panel throughout its service life. Choose this 400W module for a fixed solar array that balances high output, efficient cell technology, and practical installation requirements.
Online store with a wide selection of furniture and decor
Furniture is an invariable attribute of any room. It is they who give it the right atmosphere, making the space cozy and comfortable, creating favorable conditions for productive work or helping to relax after a hard day. More and more often, customers want to place an order in an online store, when you can sit down at the computer in your free time, arrange the furniture in the photo and calmly buy the furniture you like. The online store has a large catalog of furniture: both home and office furniture are available.
Furniture production is a modern form of art
Furniture manufacturers, as well as manufacturers of other home goods, are full of amazing offers: we often come across both standard mass-produced products and unique creations - furniture from professional craftsmen, which will be appreciated by true connoisseurs of beauty. We have selected for you the best models from modern craftsmen who managed to ingeniously combine elegance, quality and practicality in each product unit. Our assortment includes products from proven companies. Who for many years of continuous joint work did not give reason to doubt their reliability and honesty. All of them guarantee the high quality of their products, excellent operational characteristics, attractive appearance of the products, a long period of use of the furniture, as well as safety.